Parts & Accessories
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty
CR2450 battery for use in SIGMA computers. Compatible models: - BC 1909 - BC 2209 - BC 2209 Targa - ROX 8.0/8.1 - ROX 9.0/9.1 - ROX 5 - ROX 6 - BC 23.16 STS
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Connect your PC to CycleOps VirtualTraining.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Install your Polar cyclo-computer to your handlebars or stem with the Twist Lock Bike Mount. Get two of them and it's a cinch to switch your computer between bikes. A simple twist easily locks the computer to the mount.
Polar's Universal Bike Mount allows easy installation of Polar wrist units onto your handlebars. Just place the mount around your handlebars and put your wrist unit on over it. Viewing your Polar is easier and safer when it's mounted on the handlebars because you don't need to take your hand off the bars.
Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter
Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter
Keep your handlebar organized and your devices secure with the SWG-400 (28/35mm) SwingGrip from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - On Stem installation only - Lightweight and rustproof alloy construction - Angle adjustable arm design - Aluminum bar is position adjustable and uses Hex Bolt to install and remove
Advanced 2-in-1 speed and cadence sensor. Conforms 100% to Bluetooth Smart standards for max compatibility. Powerful rare earth magnet provides wider engagement spacing. Durable, lightweight polycarbonate construction with translucent body and LED indicators. Adjustable swingarm and versatile mounting system. Replaceable CR2032 coin cell battery optimized for long-lasting use. Includes O-ring mounts, spoke magnet, crank arm magnet.
PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The adjustable version allows for a variety of different stem angles. Can be used with positive or negative degree stems and additional spacers can be added (5mm to 10mm) above the stem. Note that some of the larger computers will not always work with a steep angled stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer.
K-EDGE’s legendary CNC machined aluminum quality and strength for the price conscious cyclist. Pro positioning of your computer, out-front and flush with the top of the handlebar. - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Compatible: Garmin EDGE 820, 520, 510, 500, 25 and 20. - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - Fits 31.8MM Handlebars - NOT combo compatible - Weight: 48g - Anodized Color- Black
Conveniently charge your HERO4 camera batteries with the Dual Battery Charger, the only GoPro charger that allows you to charge two HERO4 batteries simultaneously. Featuring USB compatibility, you can power it with most standard USB power adapters, the GoPro Wall or Auto Charger, or a computer. Dual LED indicator lights display the charging status, so you know when your batteries are ready for action. Includes a spare 1160mAh lithium-ion rechargeable battery for your HERO4 camera. • Conveniently charges two HERO4 camera batteries simultaneously • Can be powered with most standard USB power adapters, the GoPro Auto or Wall Charger, or a computer • Dual LED lights display charging status of both batteries • Includes a spare 1160mAh lithium-ion rechargeable battery for your HERO4 camera
Mount your GoPro to your dog to capture the world from his point of view. This harness features two mounting locations for a variety of perspectives: the chest, for bone-chewing, digging and front-paw action, and the back, for over-the-head shots of running, jumping, fetch and more. Made of washable, water-friendly material, your dog can swim, play and get dirty without a worry. Soft, padded construction keeps your pet comfortable. Fully adjustable to fit small, medium and large breed dogs from 15 to 120 lbs (7 to 54 kg).
GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets
- Conduct accessory mounts allow clean integration of handlebar accessories with the Conduct Brake System - Will fit all GoPro and Garmin models (Including 1000) Kit includes: - Universal light adapter (x1) - GoPro mount adapter (x1) - Computer mount adapter (x1) - Giant computer mount tray (x1) - Garmin computer mount tray (x1) - Computer mount disc plate (x2) - Stem bolts and washers
Take your riding to the next level with the addition of speed and cadence. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
Take your training to the next level with Garmin's Heart Rate Monitor Chest Strap. It's compatible with many of their GPS units and wirelessly gives you an accurate read out of your heart rate. Plus, it features ANT+ technology for seamless, interference-free data transferring. The front part of the strap contains the heart rate module and is made of flexible plastic while soft fabric goes around the back and is adjustable to your size.
OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.
Cadence Magnet for all CatEye computers that record cadence.
The H-34 Flex-Tight Bracket is an OEM handlebar bracket so you can attach Cateye accessories. It fits all handlebars up to 32mm in diameter.
Wheel magnet for all CatEye cycle computers
Smart Cadence Sensor applies both ANT+ and Bluetooth technology. It wirelessly transmits your cadence data to cycling computers and smart phones. With no magnets or exposed parts to line up, it is much easier to install. Easy to Use - Smart Cadence Sensor is magnet-free and super-easy to use and install as well as maintain and move between bikes. Dual Support - Featuring the application of both ANT+ and Bluetooth technologies, the Smart Cadence Sensor is able to connect to both cycling computers and smart phones, making it compatible with most devices in the market. Improve Yourself - Designed to help you monitor both outdoor and indoor training, it can be combined to improve your personal best or compete with other cyclists.
Page 1 of 6 Next page