Drivetrain

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

The Wheels Manufacturing 3.5mm Spacer Kit for 61mm Specialized OS Carbon Frame widens 61mm wide Specialized Carbon OSBB frame BB shells for use with Pressfit 30 bottom brackets. Place one 3.5mm BB cup spacer between each bottom bracket cup and the frame when installing the bottom bracket. Additional crank spindle spacers are included to fine-tune any crankset fitment play, and these spacers are machined from engineering-grade Delrin. Includes: - (2) - 3.5mm bottom bracket cup spacers (46mm ID) - (4) - .5mm crank spindle spacers (24mm ID) - (2) - 1.0mm crank spindle spacers (24mm ID)

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Machined from heat-treated, chrome-plated chromoly, these seriously tough cogs will hold up to massive track sprints and crazy skid-stops. Surly's Track Cogs are strong, shiny and they come in two widths and sizes from 13T to 22T so you can select the perfect gear.

- 5-speed freewheel - 14 – 28T

- 6-speed freewheel - 14 – 28T

- Steel - 7-speed

8-speed SIS compatible freewheel

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 7-speed - Cables and housing included

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 8-speed - Cables and housing included

• Singlespeed crankset • Alloy crankarms w/ solid steel chainring • Square taper interface • Does not include BB

• Singlespeed crankset • Forged alloy crank arms • Square taper interface • Does not include BB • 42-tooth chainring • Double chainring guard • Bolt Pattern: 104 x 4-bolt • 670 grams

•Single speed crankset •Forged alloy crank arms •Square taper interface •Does not include BB •44-tooth chainring •Double chainring guard

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline

• 6/7/8-speed MTB crankset • Square taper interface • Alloy arms • Replaceable steel chainrings • Does not include BB • Bolt Pattern: 104/64 x 4-bolt

- AL6061-T6 crank with steel chainrings - 7/8sp compatible - 177mm Q-factor - 48.5mm chainline - Spindle Type: 120 SQR JIS

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

• OctaLink interface • Only includes left crank • 175mm length

- Steel chainring with forged alloy crank arms and double chainguard - Compatible with 3/32" chains - 45mm chainline - Spindle Type: 118 SQR JIS

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- 6061 Forged Alloy - Made to O.E.M. specifications - Correct hardness to reduce damage to frame upon impact

- Bulk packed and poly bagged - Speeds: 5/6/7 - Max Tooth: 48 - Wrap: 20 - Swing: Bottom

• 5/6/7-speed rear derailleur • Highly affordable and reliable • SHIMANO Equivalent RD-TY21 / RD-A070 • 301 grams

- Youth sized 1pc cranks - Pin style chainring retention - Accepts 1/2" pedals

- Compatible with 1/2" pedals - Forged steel - 24 TPI

- Forged steel - 24 TPI

• 5/6/7-speed rear derailleur • Highly affordable and reliable • SHIMANO Equivalent RD-TY21 / RD-A070 • 301 grams

• Easy-on, easy-off • Available in two chain widths and two colors • Available in six teeth sizes

- 9-speed compatible - SIS rear index shifting - Max: 34t - Cage: Mid - Ratio: 2 to 1

• 8-speed compatible • SIS rear index shifting • 43 tooth compatible

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Drilled for 9.5mm cotter pins

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless

- Indexed replacement twist shifters for triple chainring drivetrains - Shimano-compatible (2 to 1 ratio) - Shimano Equivalent: SL-RS45 / SL-RS35

- 42-34-24t and 48-38-28t compatible, suitable for most Shimano 3x7/8sp drivetrains - Top swing with alloy base bracket/clamp - Dual pull design is convertible between top-pull and bottom-pull cable routing - Multi-clamp insert converts the 34.9mm clamp to fit 31.8mm and 28.6mm seat tubes - For standard 66-69 degree chainstay/seat tube angles - 143g

- Black polymer spacers - Multiple speed options available - Range: 14-28T - Speed: 7 - Cog Material: Steel

- Fluid Drive Plus shift profiling, compatible with SRAM and Shimano 9sp drivetrains - Steel rings, engineering polymer spacers, nickel plated finish - 11-28 - 280g

- 11-34T - Weight—354g

- 2:1 actuation ratio compatible with most Shimano 3x7/8sp drivetrains - Aluminum and steel construction with 11-tooth pulleys barrel adjuster

Shimano's 105 10-Speed Cassette delivers excellent shifting and durability. The cogs are made of long-lasing, smooth-running steel. They have Shimano's engineered tooth shapes for precision shifting. And for lightness, the cassette has an aluminum carrier for the top cogs and nylon spacers.

Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.

Shimano's 105 Dual Control Left-Side Lever lets you easily shift and brake without ever taking your hands off the handlebars. The short-stroke shifting is so telepathic you'll be in the gear you want almost before you realize you shifted. Plus, the robust design offers excellent durability and the hoods are ergonomically contoured for top comfort.

- Shimano 105 R7000 Series CS-R7000 11-speed cassette - Average weight: 284 g (11-28T), 304 g (11-30T), 320 g (11-32T), 269 g (12-25T) Combinations: - 11 – 28T: 11-12-13-14-15-17-19-21-23-25-28T - 11 – 30T: 11-12-13-14-15-17-19-21-24-27-30T - 11 – 32T: 11-12-13-14-16-18-20-22-25-28-32T - 12 – 25T: 12-13-14-15-16-17-18-19-21-23-25T

Shimano 105 7000-series components offer much of the same technology and functionality as their top-level 11-speed drivetrains at a more budget-friendly price point. The RD-R7000 rear derailleur provides stable shifting performance and wide-range compatibility in two different cage lengths. The Shadow RD design limits the amount the derailleur sticks out from the side of the bike, reducing the risk of it making contact with objects and bending. - Maximum cog size: 30t (SS) / 34t (GS) - Total capacity: 35t (SS) / 39t (GS) - Pulleys: 11t - Chain compatibility: HG-EV 11-speed/HG-X11 - Direct mount compatible

Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.

Shimano ST-EF500 shift/brake lever provide an ergonomic, integrated solution for both brake and shifting controls. - Optical gear display - Adjustable reach - 4-Finger lever, compatible with cantilever, roller, linear-pull, and mechanical disc brakes

The Shimano EF500 8-Speed dual brake/shift lever features reach adjust technology and an optical gear display. - Equipped with a reach adjust mechanism that allows for the distance from handlebar to lever to be adjusted in order to suit any hand size and riding preference - The optical gear display tells you which gear position is selected while riding - Compatible with V-Brake, Mechanical disc brake (MTB)

Shimano's Acera rear derailleur makes use of advanced designs that make it shift better and last longer. HyperGlide technology results in faster shifting, and Double Servo technology utilizes a double servo-panta mechanism that enables the rear derailleur to track perfectly to each shift and maintain an optimum distance from each sprocket. - Maximum cog size: 34t - Total capacity: 45t - Pulleys: 11t - Chain compatibility: HG 9-speed

- MODEL NO: CS-HG400-9 - SERIES: SHIMANO ALIVIO M4000 Series - Compatible chain: HG 9-speed - Speeds: 9-speed - Type: HG

- Cassette Body Type: Shimano/SRAM 8, 9, 10 Speed - Drivetrain Speeds: 8