Lighting

Modern lighting technology meets vintage style in Sunlite's Low Rider LED Bullet. The bullet shape hearkens back to the era of generator-powered headlights, but this modern torch features three LED lights to brighten your way through nighttime streets. It runs on two C-cell batteries (sold separately) for hours of use, and the two modes let you choose between a steady beam and a flashing beam. This light mounts easily on your fork or under your headset spacers to shed light on all your night time rides.

- Rack mount bracket only - Fits TL-L225 taillight

- Supplies full wheel illumination for 700c/29in wheels and smaller - Approximately 40 hrs of battery life - Water resistant design - Includes 3 (AA) batteries - Sold individually (1 wheel) - Easy to install

With a dazzlingly bright 28 LED PB Power Array and three modes, this USB rechargeable light is like a Scarlet Begonia for the back of your bike. For added safety, it has a CPSC certified reflector in the lens to keep you visible when the light is off. Versatile mounting options allow you to attach it to your seat post or rear rack with the included brackets. - PB 28 LED power array and CPSC certified reflector provides steady, Courtesy & Superflash modes - FL1 Tested - Run times: 5 hrs (steady – 20 lm), 9 hrs (Courtesy – 6-18 lm) and up to 30 hrs (Superflash - 20 lm) - Provide 160-degrees of visibility - Highly visible, even in daylight - Dust and water resistance rated to IP65 standard - 700 mAh lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Includes rear rack and seat post mounts plus clip mount for multiple mounting options - 65 grams

- Mounts Beamer and Blaze 1/2W lights to a helmet - Compatible with Beamer 1, Beamer 3, Beamer 5, Blaze 1/2W and Blaze 2W Micro, Blaze 140 SL, Blaze 180 USB - Increased weight and length of Blaze 300, 500, and 650 USB lights may cause awkward mounting on helmet

- Fits 25.4-31.8mm handlebars - Compatible with Blaze, Beamers, 1200, 5000x and Super Spot

- Attaches to rear racks - Compatible with: Blinky 3,5,7 and Superflash - 25mm between each of the top horizontal holes (center to center) - Requires an "L bracket" that typically comes with a rear rack. If your rack is missing the L bracket, you can purchase Planet Bike's rack hardware pack

- Fits seatpost (up to 31.8mm) or seatstay - Compatible with: Blinky 3,5,7, all Superflash lights and Blinky Safety rear light - Use with Blinky Safety Front light bracket to fit oversize (~31.8mm) handlebars

The PDW Kepler E-Bike Headlight works with any 6V-15V e-bike system, and it comes packed with 350 lumens and a sturdy stainless steel fork mount. The Kepler E-bike Headlight comes equipped with a Bosch-friendly plug pre-installed for quick attachment to any Bosch e-bike system. For other e-bike installations, the Bosch plug can simply be clipped off, and the light functions just the same directly wired up. - Works with 6-15V systems - Mounts to fork crown with steel bracket - Features a cut-off beam to not blind oncoming riders

The PDW Kepler eBike Tail Light offers up 220 degrees of visibility. Compatible with any 6V-15V system, this light has 3 super-bright red LED's. Equipped with a pre-installed Bosch plug, the Kepler eBike Tail Light is ready to plug directly into any Bosch eBike system. The Bosch plug can also easily be clipped off for direct wiring into other eBike systems. - Seatpost or seatstay mounting - 220 degrees of visibility - 25 Lumens - 48" cable length - Remove Bosch plug to work with any 6V-15V e-bike system

Origin-8's Eyelet Stub Light Mount is an ingenious way to easily mount a light (or other accessory) to any bicycle frame with standard rack/fender eyelets. The Stub is made of light and tough 6061 aluminum tubing with an outside diameter of 26mm and an overall length of 46mm. It simply bolts to the eyelet with its included 5mm screw. There's a press-fit cap on the end to seal it.

Handlebar mount for all systems that use the slider mounting clip. Fits handlebar clamp diameters from 25.4mm–35mm. System Compatibility: - Pro Series - HID Series - Classic Plus & Select - Evolution & Digital Evolution - HeadTrip & Digital HeadTrip - TrailRat & TrailRat Select - RoadRat - Digital Patrol LED - Digital Patrol - Pre 2001 systems

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Nip 800’s powerfully focused beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Nip features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6-18V on-board batteries such as Shimano or Bosch systems, multiple mounting options creates the perfect e-Bike lighting solution. Key features: - 800 lumen headlight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

Light & Motion Seca Comp 1500, Light up the whole trail with 1500 lumens of power. Designed for trails, the Seca Comp is also a superior road light with 4 modes for night and day safety and vision. - 3 CREE LEDs deliver a high power spot beam plus a wide flood beam for broad and deep coverage. - Quick handlebar mounting and easy to switch between bikes. - 3 modes for trail use, plus 9 hours of daytime safety on the road with SafePulse mode. - Waterproof: 1 meter depth rating (IP67 standard). - Impact resistant: 1 meter drop tested (FL-1 standard). - Powerful side markers for road safety can be turned off for trail rides. - Race mode offers one touch high/med toggle. - Fast USB charging with advanced internal circuitry. - Accurate battery status indicator. - GoPro mount available.

Tuck's powerful red pulse beam and ultra-compact size reinvents the e-Bike light. Maximizing output without bulk, the Tuck features an optimized reflector and amber side lighting for 180 degrees of protective visibility. Designed to integrate into popular 6 to 18V on-board batteries such as Shimano and Bosch systems, multiple mounting options creates the perfect e-Bike tail lighting solution. Key features: - 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee

Light & Motion Vis 1000, Light up the road or trail with 1000 lumens of raw power, or switch to SafePulse mode for maximum daytime safety. Industry-leading reliability, easy mounting, 4 modes. - Powerful 1000 lumen output in a tough, lightweight package. - Mounts on handlebar but light enough to mount on helmet; GoPro and helmet mounts available separately. Easy to mount and quick switch between bikes. - Superior daytime safety with 500 lumen SafePulse mode. - 4 modes with up to 12 hour run time. - Powerful side lights for safety on the road. - Industry-leading waterproofing and impact resistance, 2 year warranty. - Quick recharge via USB cable. - Accurate battery status indicator monitors both charging and power remaining. - Lockout Mode ensures light stays off during transport in a bag or pack. - Race Mode offers one-touch high/med toggle.

The perfect bike headlight for city riders that want premium features with an entry-level price. High visibility is prioritized and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. All the innovative safety features of the premium Vis Lights with a value-based price, Vis 500 is the leader in its class. Key Features - 500 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings to achieve long runtimes for extended rides - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 500 (high), 250 (medium), 125 (low), 125 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 270 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet

With powerful output and premium safety features, the cost-effective Vis 700 is the perfect match for road and urban cyclists. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating—meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. Revolutionary safety innovations and power to out-shine standard rechargeable lights—Urban 700 is a great solution for riders that want premium quality at a lower price point. Key features - 700 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - Daylight visible pulse mode keeps cyclist safe without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn't slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure - water immersion - Charging is reliable and simple with included Micro USB cable Tech Specs - Lumens: 700 (high), 350 (medium), 175 (low), 175 (pulse) - Runtime (minutes): 90 (high), 180 (medium), 360 (low), 720 (pulse) - Beam Angle: 20° (Spot) - Charge Time: 300 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 121 grams - Product Dimensions: 1.2" x 1.2" x 4" - Compatible Mounts: Bar, GoPro, Helmet

The future of cycling taillights is here. Vya is a game-changing design, blending powerful output with revolutionary smart features. The piercing 50 lumen output is easily visible over a distance of 1km, even in bright daylight. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya takes powerful safety lighting and keeps the rider safe so they can focus on the road ahead. Features - 50 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam pattern optimized to give a wide red swath of light that can be seen clearly from the rear and side ideal for city riding - An impressive 8 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 50 (SafePulse) - Runtime: 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min

PWR Rider is a 450 lumen bike light that can also be used as a power bank. Includes the option to program your brightness and runtime (through ModeMaker app), then use your remaining battery to charge your devices. The light outputs in an elliptical beam for broader, brighter road coverage; has a 2 hr runtime at max 450 lumens and 4 smart battery indicator LEDs to let the rider know how much charge is left in the light. The two “Charger” lights come with 5 pre-programmed modes, just in case you haven’t yet discovered the ModeMaker app. The PWR Rider will last 2 hours at 450 lumens, and for those with stamina, will run at 200 lumens for 5 hours. Program your modes: The ModeMaker app lows you to design the modes for any PWR bike light. Simply plug in your light, then select and tailor modes from the menu. You can do things such as control brightness, adjust runtimes and add new light modes. Charge your devices: Rear of the light is a USB rechargeable power bank. Use this to charge your phone, GoPro or cycle computer on the go. 1 hour riding @450 lumens means you can top up charge your iPhone by 35%. Charge time 3.5 hours. - Light output: 450 Lumens - Power bank: 2200 mAh - Dimensions: 122 x 30mm - Weight: 115g - What's in the pack: Light, Silicone Strap, USB Cable, Hex Key

- Maximum output to 20 lumens - ANSI certified lumens and runtime - IPX4 water resistant - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost, Strive, Lanza, Coveta, Liv Rev Comp and Luta series helmets

A great choice for commuters, the Recon HL200/TL200 kit features a high flash mode which ensures daytime visibility and automatic mode switch to steady/flash at night, allowing motorists to see you from as far away as 1km. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

The Recon HL500 is the perfect multi-function light for use on handlebars or helmets. It features abundant light output in a lightweight design. - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount SPECIFICATIONS - Sizes: 85x26x34mm - Weight: 81g without mount - Colors: Black; Gray; Blue; Red - Output: 500 lumens - Runtime: High (500LM) 2hrs, Middle 4hrs (300LM), Low 10hrs (100LM), Flash 100hrs, SOS: 100hrs - Battery: Li-Ion polymer battery (2000mAh) - Waterproof: IPX6 - Certifications: ANSI-Standard FL-1

A brilliant all-round combo, the Recon HL500/TL100 package gives riders ample lumen output and usage time for any casual riding scenario. Both fit easily on just about any Giant helmet and are GoPro mount compatible. Headlight: - Lumens and runtime certified to the ANSI-Standard - Focused optics with side light design for over 270 degrees visibility - Heat-dissipating CNC-machined aluminum structure - Power status indicator can let you know how much run-time to go before powering off - Includes adjustable GoPro mount Tailight: - Maximum output to 100 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with saddle rail mount, providing optimal angle for visibility

Compact and Versatile. The Recon TL100 is easy-to-use, ultra-portable and lightweight. With an integrated power indicator and IPX7 waterproof certification, the Recon TL100 provides maximum high-powered visibility at an accessible price. - Maximum output to 100 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Disperse optics with side light design for over 180-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets

Maintain Visibility All the Time. As with all the lights in the Recon series, the new Recon TL200 has a compact design, an integrated power indicator, complies with the ANSI standard and is IPX7 certified. Additionally, the smart light sensor can auto adjust the light output, day or night, to ensure you can be seen all the time. - Maximum output to 200 lumens - ANSI-Standard certified lumen output and runtime - Water proof to IPX7 standard - Two-lens focused and dispersed optics with side light design for over 270-degrees of visibility - Power status indicator alerts remaining run-time before powering off - Light memory mode - Compatible with Rev Comp, Compel, Roost and Prompt series helmets - Compatible with saddle rail mount, providing optimal angle for visibility

An easy to attach mount that allows you to clip your Recon TL to any compatible Giant helmet.

Made for the ultimate road cyclist, the HotrodTM 120 taillight unleashes a powerful 120 lumens of flashing output for unprecedented night and day cycling safety. High-intensity cluster-mounted array of LEDs work in unison for an extra-wide and powerful output, maximizing your presence on the demanding roads. Using Cygolite’s 24/7 Safety Technology® with exclusive solid and flashing modes to increase your safety, the new Hotrod Rear 120 includes new Bzzz Flash mode to stand out even more both day and night. Every bit the road cyclist's tail light, the Hotrod 120 uses a VersatiteTM flexible mount that conveniently attaches to most seat posts including aero styles. Performance - 120 lumen red tail light with 7 lighting modes engineered for road cyclists - Continuous array of LEDs work in unison to shine an extra-wide and powerful glow - Ultra low profile, water-resistant design only weighs 35 grams - USB rechargeable with 1:15 to 70 hours of run time, and 3 hour recharge time. Technology and Safety - Built-in 24/7 Safety Technology® gives you a powerful selection of 7 night and day modes (DayLightning® High Flash, High Steady, Group Low Steady, SteadyPulse®, Zoom, Bzzz Flash, Low Flash) - SteadyPulse® mode features a steady beam to help motorists gauge their distance while overlapping pulses keep them alert at night - Zoom mode signals those around you with a gentle change in brightness - All-new on Hotrod, Bzzz Flash mode alerts those around you with highly visible fast buzz-like flashes - Low battery indicator alerts you when a charge is needed - Light mode memory saves the mode you're in before the light is turned off - VersatiteTM flexible mount conveniently attaches to seat posts including aerobars - Designed, engineered, and assembled in the USA RUN TIMES: - Group (low steady): 70 hr - High Steady: 1:15 hr - Zoom: 5 hr - SteadyPulse®: 5:30 hr - Low Flash: 30 hr - Bzzz Flash: 8 hr - DayLightning® Flash: 3 hr CHARGE TIME: - 3 hrs (depending on the charger used) MOUNTING: - Flexible seat post mount BATTERY: - Built-in Li-Ion SYSTEM WEIGHT: - 35g *Features and specs are subject to change without notice.

100 lumen USB rechargeable light with excellent side visibility. A versatile rubber strap allows for quick and easy attachment/removal from the handlebar. - Compact rechargeable headlight (100 lm) - Easy to attach and remove, new rubber strap mount - Excellent side visibility - Low battery indicator - USB rechargeable (Micro-USB cable included) - Mode memory function - Two light modes (Constant / Flashing) Run time: - Constant mode 100 lumens:approx 3.5hrs - Flashing mode 100 lumens:approx 35hrs