Parts & Accessories

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Long bolts are used for the following chainrings: 110 BCD 4-bolt outer and inner road oval, 104 BCD oval 26/28/32t, 64 BCD round 26/28/30t, 94 BCD oval 30/32/34t, all CX round chainrings - Set of 4

absoluteBLACK Chainring Bolts are used to mount chainrings to the crank arms. Bolts are crafted from 7075 T6 aluminum and hard anodized for durability. - Bolts use a Torx T30 interface for greater reliability - Short bolts are used for the following chainrings: 104 BCD oval 34/36t, 104 BCD round 32/34/36/38t, and bashrings - Set of 5

The Wheels Manufacturing 3.5mm Spacer Kit for 61mm Specialized OS Carbon Frame widens 61mm wide Specialized Carbon OSBB frame BB shells for use with Pressfit 30 bottom brackets. Place one 3.5mm BB cup spacer between each bottom bracket cup and the frame when installing the bottom bracket. Additional crank spindle spacers are included to fine-tune any crankset fitment play, and these spacers are machined from engineering-grade Delrin. Includes: - (2) - 3.5mm bottom bracket cup spacers (46mm ID) - (4) - .5mm crank spindle spacers (24mm ID) - (2) - 1.0mm crank spindle spacers (24mm ID)

Machined engineering-grade Delrin inserts for adapting bottom brackets to a different type of crankset spindle. - Adapts PF30 and Cannondale BB30-73A bottom brackets for use with SRAM/TruVativ cranksets - Delrin adaptors fit between bearings and crank spindle - BB Shell Width (mm): 68 mm , 73 mm - Spindle Interface Type: TruVativ GXP - BB/Frame Interface: PF30

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

• Square taper interface • Only includes left crank

• Square taper interface • Only includes left crank • 175mm length

- Horizontal square interface - Only includes left crank

• OctaLink interface • Only includes left crank • 175mm length

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

• Forged steel • 6 1/2-inch • Compatible with 9/16" pedals • Left crank • Cotterless

SR Suntour's XCT is a replacement left crank arm for square or diamond taper-oriented cranks that features aluminum alloy construction.

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.

Problem Solvers Crank Arm Fixing Bolts - 8mm - Sold as a pair

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for double and triple chainrings, each set includes 5 male/female bolts to securely connect your chain rings to the crank. Available in black and silver, as well as aluminum or steel.

Secure your chainrings for your ride with Origin-8's Double/Triple Chainring Bolts. Made for inner triple chainrings, each set includes 5 male bolts to securly connect your chainrings to your crank.

Revamp the look of your single speed cranks with some new hardware. Origin-8's Single Chainring Bolts give a high polished look to any crankset. The anodized finish comes in multiple colors to highlight your crank and makes it look as good as you do. You can also choose between steel or aluminum bolts. • Set of 5 male/female bolts • Inside measures 4mm when tightened, 7mm total height

- M30 cap with self-extracting crank bolt and washer - Compatible with 2013 and newer FSA Gossamer cranks

- 42x30x7mm BB30 cartridge bearings housed in a press-fit, composite sleeve assembly for use with a BB386EVO or BB30 crankset in a BB386EVO or Press-Fit 30 (PF30) frame - Road sets include bearings, shields and a wavy washer - Mountain sets include bearings, shields and a spacer - Choose ceramic or stainless steel options

- Self-extracting bolts for BB30 cranks: includes puller cap that threads into BB30 crank arms - Sold as singles

- Replacement bolt kits for mounting chain guides to ISCG and ISCG-05 frame tabs - Kits include chainline adjustment spacers - 8/12mm button head bolts for single ring steel backplate guide applications - 10/16mm flat head bolts for single ring alloy backplate guide applications

- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets

Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the RaceFace cranksets that have removable Cinch spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank