Parts

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

Threaded headset keyed locknut washer - Bag of 10

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

- Aluminum w/lock nut - 18mm long/6mm O.D.

- Aluminum w/lock nut and mount - Slotted mount design

- Includes everything needed to mount hex nut style (non-recessed) caliper brakes - Model: Front

- Size: 1/2x1/8 & 3/32 (set) - Links: 1 each per bag

- Sunlite Cottered Pins

- Crank dust cap - Works with most three-piece crank models

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

- M8 Top Plate Nut

This is a replacement top plate for the Sunlite/SR seatposts. This is the top part of the clamp that holds the saddle rails.

- M8 Top Plate Bolt

- Stainless steel torx t-25 Bolt for disc brake rotors - Set of six

FSA Mega Exo Small Parts.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

Replacement bearing for the lower half of YST8003 #7 headset.

- Rubber - Color: Black

Replacement piston and seals for Hope disc brake calipers.

Hope Brake Lever Parts

Replacement piston and seals for Hope disc brake calipers.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

Race Face aluminum chainring bolts for inner chainrings. Includes four 12.5mm bolts.

- Crown Race MX - Size: MX TH 26.4mm

Air Spring Volume Reduction Kit - Cane Creel Kitsuma Air 1250^3 Negative Volume Reducer

- Aluminum straddle cable carrier for cantilever brake

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

Standard replacement star nuts for threadless steerers.

- Brake casing has internal lining and external plastic coating - Length: 30m

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

- Replacement cable anchor bolt for brakes - Includes nut and washer

- Includes everything needed to mount non-threaded brake pads to cantilever brake arms

- Crown Race - Size: 27.0mm

• MTB or Road • 1.5 x 1855mm • Galvanized

- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction

• Replacement nut for recessed caliper brakes

Shifting cables for Road/Mountain bikes.

- Large Flange-Fits Splined MX Cranks - Sold in pairs

- w/Nut - 1-3/4-inch

- Fits cantilever brakes - Sold individually

- Standard steel replacement

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

Internal components for servicing the Reverb and Reverb Stealth mechanism.

BB30 Spacer - 15.46mm

Shimano Mountain Deore XT M8000 Shift Pod Cable Adjusting Unit

Shimano E-tube Dummy Plugs - Extra E-Tube plugs for sealing unused ports on shifters or junction boxes - Sold each

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

KS Dropper Post Service Parts

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spring - Ratchet EXP